Product introduction
The melt blown gas filter material is bonded by polypropylene superfine fiber randomly. The appearance is white, flat, soft and hard. The fiber fineness of the material is 1 ~ 100 μ M. the random distribution of fiber provides more opportunities for thermal bonding between fibers. Therefore, the melt blown gas filter material has larger specific surface area and higher porosity (≥ 75%). High efficiency, high efficiency and low resistance.
Main features
Melt blown gas filter material has the characteristics of high efficiency, low resistance and high dust content
Dust suppression efficiency: 95% ~ 99.99% initial resistance value (5mmh2o): ≤ 49pa, wet resistance rise (15mmh2o): ≤ 147pa
Width: 16cm ~ 100cm, weight: 15g / m2 ~ 50g / m2
Technical index
Note:
The filtration efficiency and resistance were detected by sodium flame method, and the test condition was 0.06l/ min.cm2 3 μ M.
The thickness is measured by percentage meter.
Filter materials of various specifications can be made according to different requirements of users.
The maximum dimension of the sheet is 2500 × 1100cm.
The maximum size of coil material is any length within 550mm.
application area
It can be used to make coarse, medium and high efficiency filters with or without separators.
It is suitable for making medium efficiency, sub high efficiency and high efficiency filter materials in electronic, food, medical and other industries.
It is suitable for manufacturing national first-class dust mask, medical mask and molded mask material.
It is suitable for making automobile filter material, cylinder filter element and other gas filtering materials.
